Unable To Open Scheduler Fifo
RESULT = "AT+FRM=?" RESPONSE = "" AT+FTS=? You can also find the user ID for a particular user by logging in with telnet and issuing a STAT request: melange% telnet flake 4559 Trying 184.108.40.206... RESULT = "OK" RESPONSE = "0,1,8" AT+FCLASS? Timestamps show the date and time, with time to the right of the decimal point displayed to 10 millisecond precision (the typical granularity of the realtime clock on a UNIX system). have a peek here
at /var/spool/fax i have the following files: prw------- 1 uucp uucp 0 Aug 19 14:35 FIFO| prw------- 1 uucp uucp 0 Aug 19 14:39 FIFO.ttyS1| drwx------ 2 uucp uucp 4096 Mar ModemType: Class1 # use this to supply a hint ModemRate: 57600 # rate for DCE-DTE communication ModemFlowControl: rtscts # RTS/CTS flow control assumed # ModemSoftFlowCmd: AT\Q1 # set desired flow control The basic work described above occurs for all facsimile communication no matter whether it is done with a Class 1, 2, or 2.0 modem. This is necessary because some programs terminate with exit status 0 indicating a successful run even if an error was encountered.
Ergebnis 1 bis 1 von 1 Thema: capi4hylafax Problem -> Unable to open scheduler FIFO Themen-Optionen Druckbare Version zeigen Thema bewerten Aktuelle Bewertung Hervorragend Gut Durchschnittlich Schlecht Schrecklich Anzeige Linear-Darstellung Zur A protocol or configuration problem should be evident from the trace information. HylaFAX table of contents. RESULT = "OK" RESPONSE = "1" AT+FJUNK=?
PostScript imaging problems may also result in the faxq process not being able to reopen the imaged document after the ps2fax script is run. at ttyS1, but i can´t get make hylafax work. Suchen Sie sich einfach das Forum aus, das Sie am meisten interessiert. Modem initialization for an outbound job is included in the session log and controlled by the SessionTracing parameter.
This split permits better control over the amount of information logged in a production environment. Thank you for you help! when Ghostscript is linked with the the X11 driver and a DSO version of the X library. Finally, beware that there are several different styles of UUCP lock files; verify that your UUCP and related programs use the same style that HylaFAX is configured to use.
Versions of Ghostscript prior to about 3.63 permitted PostScript documents to set the output page dimensions to arbitrary values. after the instalation, i run faxmodem ttyS1 i start hylafax: cartman:~ # /etc/init.d/hylafax start Starting service HylaFAX done but when i try to send a fax e receive the following message: When debugging a communication problem try to identify if the problem is transient or repeatable and if the problem always happens when communicating with the same sender/receiver. what can i do to solve this problem?
Sedat YILMAZER -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Leonardo Costa Sent: Tuesday, August 19, 2003 9:15 PM To: [email protected] Subject: [hylafax-users] Problems with hylafax Hi, I have hylafax running of fax i can receive is fax99999.tif!?), what i want to do is change the format to be more make sense, for example, use the current date format "20030809xxx.tif"? You signed in with another tab or window. If a client is prompted for a password when contacting the server then it means the client is setup with a password in the etc/hosts file.
TROUBLESHOOTING: SERVER BASICS One faxq process does the job scheduling and initiation of outbound calls; it handles many tasks: manage the queue of jobs and schedule their processing prepare PostScript, TIFF, navigate here The two programs that send modem information are faxgetty and faxmodem. Connection closed by foreign host. RESULT = "AT+FRM=?" RESPONSE = "" AT+FTS=?
Personal Open source Business Explore Sign up Sign in Pricing Blog Support Search GitHub This repository Watch 14 Star 33 Fork 11 gonicus/gofaxip Code Issues 0 Pull requests 0 Projects MODEM ENGINEERING FIRMWARE DEPARTMENT" ATI8 RESULT = "OK" RESPONSE = "1310" ATI9 RESULT = "CIR31004159\MODEM" RESPONSE = "CIR31004159\MODEM" Class 1 stuff... This looks like a Class 1 modem. http://cleantechinnvest.com/unable-to/unable-to-register-scheduler-with-mbeanserver.html Note however that the contents of this log is controlled by the value of the SessionTracing parameter specified in the per-modem configuration files.
Some applications such as sendfax search an additional file as well. It means that faxq is not running.Thanks,Lee.____________________ HylaFAX(tm) Users Mailing List _______________________To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgiOn UNIX: mail -s unsubscribe [email protected] < /dev/null*To learn about commercial HylaFAX(tm) support, mail [email protected]* 1 Reply There is a configuration file for the faxq scheduler process, etc/config, and one file for each process that uses a modem, etc/config.device. (The hfaxd process that implements the client-server protocols also
The SessionTracing parameter was set to 0x4f.
The HylaFAQ contains information on some common communication problems that might be encountered. Terms Privacy Security Status Help You can't perform that action at this time. TROUBLESHOOTING: COMMUNICATION PROBLEMS Communication problems refer to errors that occur during an outbound call handled by faxsend or pagesend, or an inbound call handled by faxgetty. On the server machine make sure that the hfaxd program is setup to run standalone or properly configured to be invoked by the inetd program.
Note also that sendfax has a command line option that lets you select 1D-encoded data in any single transmission. It may not however be able to verify DSO-related problems of the nature described above. Consult manual pages for complete information about configuration file handling. this contact form [email protected]+1.215.438.4638 office+220.127.116.1135 fax ----- Original Message ----- From: Taboo Test To: HylaFax-users Sent: Friday, August 08, 2003 1:34 AM Subject: [hylafax-users] Change the fax-attachments' name?
first verify that your data communication software is configured to use the correct modem initialization strings and that both HylaFAX and the program(s) in question are using the same device name. HylaFAX clients are assigned a ``fax user ID'' when they login to a HylaFAX server. Modem-related tracing information is controlled by ServerTracing, SessionTracing, and LogFacility parameters that are put in the per-modem configuration files. Session tracing is the logging done while a server process is actively communicating with a remote device; e.g.
The only server tracing information that might be needed is for modem setup work done by faxgetty which does not appear in a session log. Enabling all tracing can affect the operation of the server processes by altering the timing of operations. Leonardo Costa ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe [email protected] < /dev/null *To learn about commercial HylaFAX(tm) support, mail [email protected]* Next Message by Alle Rechte vorbehalten.
The tiff2fax script depends on programs that are part of the separate TIFF software distribution and, in some instances, the ps2fax script. RESULT = "OK" RESPONSE = "(0-1)" AT+FAA? The lines marked ``FaxQueuer'' are generated by the faxq process. Foren-Regeln -- linuxforen -- Standard Mobile Style -- Deutsch (Du) -- Deutsch (Sie) linuxforen.de --- Impressum -- Sponsoring Archiv Nach oben Alle Zeitangaben in WEZ +1.
Klicken Sie oben auf 'Registrieren', um den Registrierungsprozess zu starten. Typically once a system is setup and working the amount of server tracing information captured can be quite small while the session tracing logged needs to be more extensive to help May be somebody can help me. If you are in doubt you can disable the use of 2D-encoded facsimile data with the User2D configuration parameter to faxq: Use2D: no (remember this goes in faxq's etc/config file, not
AT+FCLASS=? There is also a separate bit for tracing low-level job queue operations; this should only be needed on rare occasions. RESULT = "ERROR" RESPONSE = "ERROR" AT+FAE? a. -- Aidan Van Dyk Create like a god, [email protected] command like a king, http://www.highrise.ca/ work like a slave. |\^/| |\^/| |\^/| |\^/| |\^/| |\^/| _|\| |/|_ _|\| |/|_ _|\| |/|_
Note that when capturing a trace for the purpose of submitting a bug report, the less extraneous information that you include, the easier it is for people to help understand the