Unable To Open Robotic Path Linux
avrdude: can't open config file "/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf": No such file or directory avrdude: error reading system wide configuration file "/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf" avrdude.conf location ~$ locate avrdude.conf /etc/avrdude.conf /usr/share/arduino/hardware/tools/avrdude.conf Update: I fixed the problem Mark Harvey Reply | Threaded Open this post in threaded view ♦ ♦ | Report Content as Inappropriate ♦ ♦ Re: Netbackup 7.0.1 and mhvtl 0.18-12 Administrator Can you please On the 'native host' where the mhvtl is running, tests work fine: mharvey02:/opt/mhvtl # mt -f /dev/st3 rewind mharvey02:/opt/mhvtl # dd if=/dev/st3 of=/tmp/b1 bs=1k count=1 1+0 records in 1+0 records out Problem seems easy to fix but I can't find where the path to avrdude.conf is defined. http://cleantechinnvest.com/unable-to/unable-to-open-web-project-the-file-path.html
No Yes Did this article save you the trouble of contacting technical support? Showing results for Search instead for Do you mean VOX : Backup and Recovery : NetBackup : New Tape Robot/Drive - Cannot Backup Subscribe to RSS Feed Mark Topic as New NetBackup then asks the tape device for its position at the end of each write. Regards from Australia Mark Harvey thangTT Reply | Threaded Open this post in threaded view ♦ ♦ | Report Content as Inappropriate ♦ ♦ Re: Netbackup 7.0.1 and mhvtl 0.18-12
Auto Empty Media Access Port Request Rejected By Tldcd, Unable To Open Robotic Path
Tape drive firmware issues can make tape media show up as read only when they are not. Once the tape drive is cleaned a new tape is loaded and reloaded repeatedly, the /usr/openv/volmgr/debug/robots log will show: 12:43:53.753  <4> AddTldLtiReqEntry: Processing ROBOT_CLEAN request... 12:43:53.753  <5> CleanDrive: Attempting to move the tape using robtest produced the following error: m p1 s28 Attempting to move the tape in port 1 of the CAP to slot 28 Initiating MOVE_MEDIUM from
You may also refer to the English Version of this knowledge base article for up-to-date information. Hope this helps!RegardsTorsten.__________________________________________________There are only 10 types of people in the world -those who understand binary, and those who don't.__________________________________________________No support by private messages. We added a new disk array to the server last week and I noticed all the backup jobs were failing. Robotic Library Is Down On Server Skip to ContentSkip to FooterSolutions Transform to a Hybrid Infrastructure Protect Your Digital Enterprise Empower the Data-Driven Organization Enable Workplace Productivity Cloud Security Big Data Mobility Infrastructure Internet of Things Small
Attachment Products Subscribe to Article Search Survey Did this article answer your question or resolve your issue? Unable To Open Robotic Path (201) This TechNote has more details on SCSI reservation: http://www.symantec.com/docs/HOWTO32767 HP-UX 11.31 IA64 / atdd driver BPTM block position check fails one block short when using IBM atdd driver 126.96.36.199 on HP-UX 11.31 please have a look at the below log (Netbackup log) and advise what 's wrong ? NetBackup then tries to send the next block of data but the tape driver refuses, as the 'tape full' flag is set.
maybe I need to wait for next tgt release (1.0.12) ? Your hardware vendor should be able to help to find the root cause. Thanks View solution in original post 0 Kudos Reply 5 Replies do a lsscsi --generic and sru Level 3 06-05-2016 09:10 AM Options Mark as New Bookmark Subscribe Subscribe Check the Event Viewer or system log for errors.
Unable To Open Robotic Path (201)
For example, my HP proliant gets connected to just the drive of the library and the OS must be able to scan multiple lun's to find the robot. Creating an empty file /usr/openv/netbackup/db/config/DISABLE_IMMEDIATE_WEOF will resolve the issue I/O Error Symptom: Errors using the term I/O For example: 11:20:18.246 [8504.5292] <4> write_data: WriteFile failed with: The request could not be Auto Empty Media Access Port Request Rejected By Tldcd, Unable To Open Robotic Path I had to move the machines from the server room so as not to blow dust into other existing systems.Q: Did you already check the connection status between the NSR and Unable To Sense Robotic Device (202) scan is not a netbackup command, and it does not run any netbackup commands, and there is nothing that can be down in netbackup to fix this.
Close Sign In Print Article Products Related Articles Article Languages Subscribe to this Article Manage your Subscriptions Problem This article explains how NetBackup uses tape drives. this contact form CALL US: 1 (866) 837-4827 Solutions Unstructured Data Growth Multi-Vendor Hybrid Cloud Healthcare Government Products Backup and Recovery Business Continuity Storage Management Information Governance Products A-Z Services Education Services Business Critical So to clean up with NetBackup, # vmdelete -m
It appears that the iSCSI stack (initiator or target still to be tracked down), is not passing the partial block of data read. NetBackup is not the cause but, when the issue is fixed, the paths to the devices may have changed. I used the driver included with the NBU software to connect my Quantum Superloader3 and it was working fine. have a peek here Providing the passthrough driver is configured, Symantec recommends to consult your hardware vendors and/or Operating System/SAN Administrators to further investigate scan command issues.
No Yes Did this article save you the trouble of contacting technical support? But if OS is detecting then why not NBU is? 0 Kudos Reply unplug the library cat Will_Restore Level 6 03-15-2013 06:25 AM Options Mark as New Bookmark Subscribe Subscribe to When started, they fail with a NetBackup Status Code 277: the drive is not ready or inoperable. In general, NetBackup Status Code 277 appears when device changes are made in
When it is understood how the scan command works, it is clear how the root of the issues are external to NetBackup. Although the scan command is supplied by Symantec, it
Please do not hesitate to let me know if more information is required. The most common cause of this is a SCSI reset on the SAN. NetBackup has no concept of tape capacity. So first step, what version of unix are you using, and can the changer be seen from the OS - eg.
Hope this helps!RegardsTorsten.__________________________________________________There are only 10 types of people in the world -those who understand binary, and those who don't.__________________________________________________No support by private messages. To investigate this Symantec suggests logging a support call and quoting eTrack 2229875 Read/ Write errors Symptom: Errors seen with read or write issues. Standard steps that you can try in this situations are 1. Check This Out I added two lines to preset/platform_avr.txt, and now it works.
Please ask the forum!If you feel this was helpful please click the KUDOS! rpm -i sg3_utils-1.35-1.src.rpm This installs many sg* commands, which can be used to run the same sort of commands as scan, or in other words, think of these as a Labels: 7.1.x and Earlier Backup and Recovery NetBackup 0 Kudos Reply 3 Replies I would run the nbsu support Stuart_Green Level 6 02-15-2010 02:11 AM Options Mark as New Bookmark Subscribe Acclaimed Contributor Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content 08-12-2008 02:28 AM 08-12-2008 02:28 AM Re: robot inventory failed:
For example, the 'test-unit-ready' SCSI command is used, for example, when mounting a tape. On occasion, it is necessary to recreate/rebuild the pass-through driver. If anyone has any insight, I would be most appreciative. So what will be at fault, most obvious guess would be either a hardware fault or firmware issue on the library. There are no settings in NetBackup that control tape capacity.
Tapes not reaching capacity Symptom: Less data is written to the the tape than expected. Or rather, when installing a server exactly the same but with SCST (custom kernel) the errors do not happen and Netbackup is happy to use the tape multiple times and restore In this case, the cause of the issue was due to the fact that the robot was unable to access its own slots. The tape cannot be read and the data on the media is lost.
Cheers Mark Regards from Australia Mark Harvey thangTT Reply | Threaded Open this post in threaded view ♦ ♦ | Report Content as Inappropriate ♦ ♦ Re: Netbackup 7.0.1 and Description: The tape drive has an error which requires the tape cartridge to be ejected for error recovery LTO tapes contain a small EEPROM chip, known as LTO-CM.